Mausoleum Supplies

Casket Tray

Casket Tray Bag System

This system includes (1) Vacuum Form Tray, Plastic Bag With Check Valve, Absorbent Liner, Rubber Seal and Crypt Beads.

Spacers & Crypt Screens

SPACERS
The mold injected High Impact Styrene Spacers are available in three sizes – 3-1/4″,  3-1/2″ and 4″.
Please note End Cap Spacers Below.

END CAP SPACERS
The mold injected High Impact Styrene End Cap and 1-1/4″ PVC Pipe can be cut to any size Spacer needed.
Used for end walls and odd-size walls.

CRYPT SCREENS
The Crypt Screens are made of a fine aluminum 40 / 40 mesh screen. Prior to an entombment the red plastic cap is cut open to insert the 1/2″ tapered Screen. This Screen helps to reduce bug problems.

Plastic Crypt Beads

Protect-A-Crypt Pillow

A new and simple way of preventing costly damage to your mausoleum. Prevents leakage in a simple way. Made of a super absorbent material, and shaped like a pillow. Absorbs and holds up to 10 gallons of liquid. It’s an inexpensive and yet dignified way to prevent any possibility of leakage damage to your mausoleum………and one less 
worry for you in the future.

High Impact Plastic Niche Form/Liners

Dual Performance as a Form and as a Liner

We recommend before pouring concrete you install a temporary ‘Cross Brace’ in each Niche form.

The High Impact Plastic Niche Form / Liner helps you cut labor costs and gives you the professional look you have been wanting.

TWO SIZES AVAILABLE (Click for Picture):
11-3/8″ x 11-3/8″ x 10″ deep and 12-3/4″ x 12-3/4″ x 12. Both units feature a flange which permits rapid installation. They fasten to the form with 4 penny nails which go through pre-drilled holes in the flange (reference dimension sheet below).

The Niche From/Liner remains in the concrete to give you a permanent, attractive niche for the cemetery entombment. Color – Gray to match concrete.

Niche Covers available for both sizes.

ADDED FEATURE: 
Because of their unique design and and light-weight strength, these niches can be supported individually by the aluminum or oak framework which permits rapid installation in existing mausoleums without the mess, cost or work or pouring concrete.

The rear elevation above shows the High Impact Plastic Niche Form/Liner nailed to the form before pouring and illustrates the easy process of installation.

Cement Board Crypt Sealers

Available in 1/4″ and 1/2″ thickness for standard crypts, niches, and one piece couch crypts and westminister slabs.

Shelving and uprights for columbarium also. Meets all national cemetery codes, including California.

Quantity Price-break available.

Crypt Sealers

The Crypt Sealer is produced of high-impact, high density polystyrene and is now reinforced with twice the amount of ribs for a strong, rigid installation. Easily installed, this Crypt Sealer weighs only 5 pounds (marked for top). Six sizes are available: 31-3/4″ x 26-1/2″ / 32 x 26-1/2″ / 33 x 26-1/2″ / 33 x 26-3/4″ / 33-1/4 x 26-1/2″  and 33 x 27″…. can be trimmed to fit other dimensions. Caulking grooves on all sides of unit ensure a proper seal. Front is smooth and gray to match concrete. CEMENT BOARD ALSO AVAILABLE IN ANY SIZE

TO INSTALL	FIRST ENTOMBMENT	FINAL ENTOMBMENT

Paulex Powder

Paulex Powder is a highly effective external embalming powder for controlling odors, killing insects, preserving tissue, inhibiting mold and mildew.  100% active ingredients without any inert fillers. For use in Caskets, Mausoleums, Crypts, body bags, and wherever external embalming is necessary.

Sold in one pound containers.